Available In 3Ft, 4Ft, 5Ft, & 6Ft Adjustable tip for fine tuning SWR & resonant frequency Exclusive impedance matching transformer lead 3/8" fiberglass rod for heavy duty performance, 1/4" tapered fiberglass rod on Flex Fully linear top loaded for maximum transfer of power out of antenna ( better than helical winding ) Spaced windings to reduce dielectric heat loss 18 gauge silver plated wire to reduce resistive losses on FGT, 22 gauge on Flex PVC protective covering around antenna on FGT, special rubberized covering on Flex. Static reducing weather cap 3/8" X 24" standard threaded mounting 5 Year Warranty on FGT, 1 Year on Flex            Colors Available In Black, White, Or Red

Testing the popular fiberglass antennas showed some brands insert losses, like a dummy load, to make their antenna look good on the SWR meter, but sacrificed most of the power gain.

Wilson designed the Silver Load, with its exclusive impedance matching transformer, to give good SWR without sacrificing power gain. Additionally, using spaced windings on the top load to eliminate the dielectric losses, and silver plated wire for maximum radiation, Wilson has the best performing fiberglass antenna available.
 
 

PERFORMANCE GUARANTEE: The Wilson Silver Load FGT fiberglass antenna will outperform the fiberglass antenna it replaces or your money back. This guarantee is good for 15 days from the date of purchase at the original purchase point only, and with dated sales receipt.

 
ANTENNA POWER GAIN : the amount of improvement in power amplification over another antenna. The higher gain antenna will transmit & receive farther, but the actual distance will vary depending on the gain, ground terrain and other environmental factors. Individual test results may vary due to the vehicle's ground plane and matching configuration.

EXAMPLE :The Wilson X has 20% more power gain at 27.185 MHz than Brand X antenna. This means that if the Wilson transmits 100 watts of power, then Brand X will need 120 watts of power to have the same signal strength at the receive end.
 
 

The Wilson Flex Fiberglass Antenna

Patterned after the proven performance of the Wilson FGT fiberglass antennas, the Wilson Flex antenna out performs all similar types of top loaded flex fiberglass antennas. It is designed specifically for the CB user requiring an antenna that will take the rigorous vibrations from a truck, handle rugged use, the extreme changes in cold weather, and still perform well.

Wilson uses larger 22 gauge silver plated wire to provide more efficient operation. A special weather resistant rubberized cover is used to maintain flexibility. The tapered 1/4" fiberglass rod is more expensive to use, but offers the durability that is required from this type of flexable antenna. With the tunable tip, and the exclusive matching lead, you can easily tune the Wilson Flex for a low SWR. The Wilson Flex antenna is available in both 3' and 4' sizes.